How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22002
Experience:  Licensed in Hydronics and Boilers
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a Cayman Series Sundance Spa. Manufactured in 2005.

Customer Question

I have a Cayman Series Sundance Spa. Manufactured in 2005. The pump and motor are running but the spa will not heat. There is a flashing FL 1 on the control panel. What does this mean?
Submitted: 6 months ago.
Category: Pool and Spa
Expert:  Billy replied 6 months ago.

I am very sorry your question has not been picked up yet.

I just logged on and found you had not been assisted.

Please let me know if you still need help and I will do my best. Please do not "Rate" as we have not worked toward an answer yet.

If you would like to proceed let me know by replying. Once again use reply

Customer: replied 6 months ago.
I still have not received an answer
Expert:  Billy replied 6 months ago.

this mean even though the pumps are running a flow switch is not closing.

There is a switch activated by the water flow...this in turn lets the heater come on.

It can be plugged filters, weak flow, bad flow switch.


Related Pool and Spa Questions