How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Fix my Pool and Spa Your Own Question
Fix my Pool and Spa
Fix my Pool and Spa, Owner / Technition
Category: Pool and Spa
Satisfied Customers: 1053
Experience:  Over 24 years in pool and spa service and construction
30729442
Type Your Pool and Spa Question Here...
Fix my Pool and Spa is online now
A new question is answered every 9 seconds

How do I remove the display unit from the Sundance oval

Customer Question

How do I remove the display unit from the Sundance oval display module on the Hawthorne. I need to fix the wiring from the main spa controller to the display/control unit.
Submitted: 9 months ago.
Category: Pool and Spa
Expert:  Fix my Pool and Spa replied 9 months ago.

OK well there were two different ways Sundance adhered the topside to the spa.

FIrst was by having 4 small screws in topside down into acrylic but you need to peel off the display cover to expose the screws. It is a sticker like piece stuck down onto the topside just take a Flathead screwdriver and peel up the sticker and you should see the 4 screws one in each corner once removed the topside should just pry up and out of hole.

Second way was that they used used double stick tape to hold topside down, you should be able to just pry it up and remove.

Related Pool and Spa Questions