How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22388
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

Caldera Geneva 2005 Hot Tub - gh Limit Switch keeps

Customer Question

Caldera Geneva 2005 Hot Tub - High Limit Switch keeps tripping. After GGCI power reset, have both Green LIM light and Red Heater Light. Can run both Main Pumps OK. Lower on panel get Red "Pumps ON" LED. Then High Limit Switch trips after two minutes, clear audible sign that it has tripped. Both LIM and Heater lights go out, but Pump Light remains on. It appears that the Circulation pump is trying to run as there is clearly audible and carry over vibration in the lower compartment. When I put my hand on the pump the vibration goes down. Question: High Limit switch can be tripped by the Heater going over limit, or Flow Switch failure? Can you jump the flow switch to see if this solves the problem?
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.

I apologize for the holiday delay.

Do you still need assistance?