How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Fix my Pool and Spa Your Own Question
Fix my Pool and Spa
Fix my Pool and Spa, Owner / Technition
Category: Pool and Spa
Satisfied Customers: 1053
Experience:  Over 24 years in pool and spa service and construction
30729442
Type Your Pool and Spa Question Here...
Fix my Pool and Spa is online now
A new question is answered every 9 seconds

Ok balboa spa is flashing 104 temp and will not lower when I

Customer Question

Ok balboa spa is flashing 104 temp and will not lower when I push the button for lower temp. Checked mode it's EC and will not go into standard. Just keep flashing and not responding. Any thoughts.
Submitted: 11 months ago.
Category: Pool and Spa
Customer: replied 11 months ago.
I turned t off 2x waited 1 minute n same problem
Expert:  Fix my Pool and Spa replied 11 months ago.

I would first start by unplugging the topside from circuit board wait 30 seconds then reinstall plug. Check for any burn marks or damage to board. The issue is that we don't know if it is a bad topside or a bad circuit board and without another topside there is no way to be sure. The fact that you can not get it out of EC makes me think that it is a bad topside.

Related Pool and Spa Questions