How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22090
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I put a new L50 pool side controller on my Vita pa hot tub

Customer Question

I put a new L50 pool side controller on my Vita pa hot tub because the old one was unresponsive. Now the pump work but the lights don't work and I can not adjust the water temperature. I have reset the controller by holding the down arrow down.
Submitted: 11 months ago.
Category: Pool and Spa
Expert:  Billy replied 11 months ago.

hello,

was the item a direct changeout or a generic retrofit?

Customer: replied 11 months ago.
A direct change out. I could send you a picture
Expert:  Billy replied 11 months ago.

Have you cleaned the edge and molex connectors?

A pic is great

Customer: replied 11 months ago.
No I can try that. Would that keep the controller from being able to adjust the temperature up or down
Customer: replied 11 months ago.
What should I use to clean it with
Expert:  Billy replied 11 months ago.

fine thin strips of sand paper to burnish the connections...we just need to make every connection as clean as possible.

Customer: replied 11 months ago.
Cleaning the molex connection did not solve the problem

Related Pool and Spa Questions