How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1671
Experience:  Servicing pools and all brands of spas for over 28 years.
32482502
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

Have a optima 2001. First picking up fault Flo but heater

Customer Question

Have a optima 2001. First picking up fault Flo but heater would operate on duration cycle so I bought new sensor in filter. Now reading. Sn1. Sn3 so I bought hi limit and replaced. Still same. Do have spare electronic board
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Fix my Pool and Spa replied 1 year ago.

OK so FLO is for Flow switch next to heater assembly SN1 Sn3 is sensors ie. Thermostat High limit Flow switch, if all of these are new then it is the circuit board itself. If you have a spare board replace it.

Related Pool and Spa Questions