How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22092
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a sundance spa - sentry 850. It has been off (breaker

Customer Question

I have a sundance spa - sentry 850. It has been off (breaker off at panel) for a couple months. (Was working fine before, I pulled the breaker because the hot tub had a small leak). Today I turned on the breaker and heard the motor turn and turn but it could not because the hot tub is a little frozen. After about 15 seconds the motor stopped and the panel went dark. I turned off the breaker and warmed up the hot tub with some heaters. When I turn on the breaker now nothing happens. (Panel dark, not motor, etc). Is there a reset switch or did I possible blow the onboard fuse?
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.

hello,

can you tell me the voltage currently going to the board measured hot wire to hot wire?

Customer: replied 1 year ago.
I replaced the 8a fuse and everything worked as expected.
Expert:  Billy replied 1 year ago.

great news, I am glad all is back to normal

Blly

Related Pool and Spa Questions