How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22115
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

Just put in new pumps. The original problem persists. Just

Customer Question

Just put in new pumps. The original problem persists. Just clicks.
Submitted: 1 year ago.
Category: Pool and Spa
Customer: replied 1 year ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Billy replied 1 year ago.

Hello,

what was original problem?

are pumps getting full rated voltage or is there no signal to pumps?

Expert:  Billy replied 1 year ago.

Hello,

what was original problem?

are pumps getting full rated voltage or is there no signal to pumps?

Customer: replied 1 year ago.
Motor won't run. When I press jet button, there is one click. No other sound. That was the original problem before I placed new motors. I checked the control board and I don't see any burnt areas. There are 3 fuses that all seem to be working. But they each have only 110 volts. But the power wires coming in have 110 and another is 240.
Expert:  Billy replied 1 year ago.

measuring hot wire to hot wire...what voltage is sent to pumps?

Related Pool and Spa Questions