How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22110
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

IntelliTouch system I7+3 My indoor controller unit will not

Customer Question

IntelliTouch system I7+3
My indoor controller unit will not program: ie can't set the date, time etc. When I try to push programming out to the outdoor control panel I get an error code of “There was an error retrieving the data” I can turn on the pump and lights but I can't turn them off from the inside controller.
I did remove the inside controller and hooked it up directly to the outside controller to rule out bad wiring.. Your thoughts
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.

hello,

when hooked directly did unit regain operation?

Related Pool and Spa Questions