How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22110
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a older cal spa and the low pump and heater are

Customer Question

I have a older cal spa and the low pump and heater are working but the spa light and high pump are not, i have two buttons on controls, the right controls temperature and activates spa mode choice. the left operates the light and high jets and selection on spa mode. do i i have a burnt fuse
Submitted: 1 year ago.
Category: Pool and Spa
Customer: replied 1 year ago.
i took out a fuse and put the same one back in and now the light and high speed come on. im waiting to see if the heater will raise the heat from 100 to 104.
Customer: replied 1 year ago.
now it is back to not working for light and high speed. it did not raise to 104.
Expert:  Billy replied 1 year ago.

Is the fuse you replaced burned out again?

Related Pool and Spa Questions