How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22107
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

Trying to start spa up after FLO came on panel. I hear a

Customer Question

Trying to start spa up after FLO came on panel. I hear a clicking sound but the pump won't start. Can you help?
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.

can you tell me if the pump gets power but doesnt run or does not get power?

Customer: replied 1 year ago.
I believe the pump is getting power but doesn't run. The tub had a low level of water in it for a while. The water was level with the jets.
Expert:  Billy replied 1 year ago.

It is possible the pump burned up if it tried to run empty.

If power is present at pump with no operation, means you need to replace the motor.

Billy

Related Pool and Spa Questions