How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22120
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

Spa Depot provided a Gecko 240 volt replacement pump

Customer Question

Spa Depot provided a Gecko 240 volt replacement pump (02115005-1010). The crux? The old pump (02115519-2) was 115 volt. (I leaned later I could have purchased the 115 volt pump from Canada) Okay, no big deal...My fuse box is 10 feet away. I set up a 240 dedicated feed +GFCI...Wait, this is not going to deliver 220 to my pump without some kind of adjustment to the Spabuilder panel...no switch. What exactly is that adjustment?
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.

hello,

it could be done but would be very rudimentary with relays and wiring. It would be best to get a correct voltage motor.....or you end up with a separate 220 feed to a relay which is closed by the 115v signal

Related Pool and Spa Questions