How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22120
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have a Spaform Lyon 4000 which keeps showing FLO which

Customer Question

Hi, I have a Spaform Lyon 4000 which keeps showing FLO which shuts it down. If i tap the temp and mode buttons repeatedly it will start up again and then run fine until the jets are turned off then back to FLO. As a result it is not starting its normal filtration cycle on its own. The filters are quite new and clean, I replaced both capacitors and I had the pressure switch calibrated by the local pool shop. They now don't know what to suggest. Do you have any ideas what could be wrong?
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.

hello,

is there any calcification in the system?..have you tried jumping the pressure switch (as a test) to see if code stays?

Related Pool and Spa Questions