How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22092
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

Just replaced my spa pump, blower, heater, control panel and

Customer Question

just replaced my spa pump, blower, heater, control panel and circuit board. the blower and pump to not work
Submitted: 1 year ago.
Category: Pool and Spa
Customer: replied 1 year ago.
the pump and blower do not work
Customer: replied 1 year ago.
thermo spa 1900D
Expert:  Billy replied 1 year ago.

hello,

when you call for use....does the board send power to the pump?...or there is no power to pump?

Customer: replied 1 year ago.
I select pump from control panel and I here the relay on the board click but pump doesn't power on. I select pump again and it clicks then clicks again.
Customer: replied 1 year ago.
When I select the blower nothing happens, I replaced the circuit board. The old and new board reacts the same.

Related Pool and Spa Questions