How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22469
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

My Jandy Aqua Pure is not working (no flow) is the message

Customer Question

My Jandy Aqua Pure is not working (no flow) is the message on my PDA. Pool installed 4 years ago. I replaced the cell about 3 months ago. I replaced the power cord 2 months ago.
The top of the cell, where the cord is plugged into, is corroded - one pin more than the other. It looked like that on the previous cell as well.
Very frustrating.
Help.
Thanks
Dave XXXX
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.

hello,

with a no flow code we need to first see if the pump is running. If the pump is running we move to flow switch.

Can you verify pump operation?

Related Pool and Spa Questions