How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22109
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I replaced the circulation pump on my hot springs, also the

Customer Question

I replaced the circulation pump on my hot springs, also the jumper pressure switch but the red light continues to flash. Also the circulation pump seems to go on and off
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.

if the pump is going off and on it is supply voltage issue to the pump. This would be a bad control board.

Are you jumping the flow switch AFTER the pump starts or before?

Related Pool and Spa Questions