How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Supes0 Your Own Question
Supes0
Supes0, Pump Repairman
Category: Pool and Spa
Satisfied Customers: 7
Experience:  I have 18+ years of experience in the sales and repairs of water pumps.
52333636
Type Your Pool and Spa Question Here...
Supes0 is online now
A new question is answered every 9 seconds

My Compool easytouch spa and poll upgrade control system

Customer Question

My Compool easytouch spa and poll upgrade control system stopped turning the pump on. I ran a self test & got the status code "4"
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.

hello, this means power center not communicating with panel. Was there a power issue or repair on the unit recently?

use reply

Customer: replied 1 year ago.
I took the motor off & it was rusted through on the bottom. I bought a new motor.
Expert:  Supes0 replied 1 year ago.

http://www.pentairpool.com/pdfs/compooleasytouchupgradeOM.pdf

This should be the manual for your control. It says that code 4 is Switch (buttons)

Related Pool and Spa Questions