How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22116
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

Aqua Logic AQL PS-4 control panel will not turn on or off

Customer Question

Aqua Logic AQL PS-4 control panel will not turn on or off filter pump. It makes a clicking sound and must be in the lit (on) position to work, but I have to turn pump on and off by the breaker. The rest of the panel controls seem to work properly when pressed. Pump motor was recently replaced.
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.
Hello,
This means the contacts for pump relay are welded shut.
The only fix for this is to replace the board that pump wires attach to. The board thinks it turns them off, but the contacts are stuck in the closed position.
Even if you get them unstuck...they always stick again.
Billy

Related Pool and Spa Questions