How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22109
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

It's Rob. Our 2010 Vanguard Hot springs tub isn't working.

Customer Question

Hi it's Rob. Our 2010 Vanguard Hot springs tub isn't working. the green ready light will not light. we replaced the heater and also the circ pump. i can hear 3 clicks when i power on the spa. temp is still 94 after 4 days
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.
hello,
if the pump is running...is the flow switch closing?
use reply
Customer: replied 1 year ago.
How can I tell if the flow switch is opening? and do you mean with a pump on or the circ pump?
Expert:  Billy replied 1 year ago.
This is with the circ pump running..before anything happens the flow/pressure switch must verify flow.
Using a meter can tell you by ohming the switch for resistance or by checking for voltage across the switch.

Related Pool and Spa Questions