How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Fix my Pool and Spa Your Own Question
Fix my Pool and Spa
Fix my Pool and Spa, Owner / Technition
Category: Pool and Spa
Satisfied Customers: 1053
Experience:  Over 24 years in pool and spa service and construction
30729442
Type Your Pool and Spa Question Here...
Fix my Pool and Spa is online now
A new question is answered every 9 seconds

I have a sweetwater spa - 2 pumps - the high speed

Customer Question

Hello - i have a sweetwater spa - 2 pumps - the high speed pump works - low speed pump does not work - getting code F. with power on hear clicking from inside the control panel
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Fix my Pool and Spa replied 1 year ago.
Sounds like you have a bad low speed pump. In a two pump spa usually pump 1 is two speeds low/high and the second pump is high speed only. In this case pump 1 would be bad since you have no low speed which is the speed used to heat the spa and filter the F is a flow error code due to the pump failure. Replace the low speed pump.
Expert:  Fix my Pool and Spa replied 1 year ago.
Forgot to mention that some spas have a circulation pump that controls heat and this is a smaller pump than normal so maybe that pump is bad.

Related Pool and Spa Questions