How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1671
Experience:  Servicing pools and all brands of spas for over 28 years.
32482502
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

Liner has pulled from flange and I am having trouble putting

Customer Question

Liner has pulled from flange and I am having trouble putting it back. Any hints on how to pull liner back up into flange?
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Fix my Pool and Spa replied 1 year ago.
You will need to lower the water about a foot lower than the liner trouble area, then CAREFULLY use a blow dryer and heat up the liner around where you want to stretch it upward to re-insert into liner bead. VERY IMPORTANT not to get the blow dryer too close to liner as you can burn it, also do not pull too hard upward as if the liner is on the older side you can tear it. Once you have the liner back in track stick a penny into the groove to hold it in place.

Related Pool and Spa Questions