How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22115
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have an old compool time master controller & spa(LX-10

Customer Question

I have an old compool time master controller for pool & spa(LX-10 model I believe). We had power go out for about 5 min twice 2 nights ago. Everything runs if you manually turn it on. However, after setting the clock, it does not run. Therefore it doesn't control the programs. The digital clock remains on the time set and doesn't move. Is there a reset process for the clock to come back on? We have had power go out before and did not have this problem other than resetting & reprogramming the unit.
How do I get the clock running again?
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.
Hello,
do you see a thin round battery on the board?
Remove and clean contacts and reinstall.
If that does not work check back of board for hotspots

Related Pool and Spa Questions