How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Machinc Your Own Question
Machinc
Machinc, General Contractor
Category: Pool and Spa
Satisfied Customers: 817
Experience:  Has written home improvement articles since 2008. Earned South Carolina Residential Builders License in 1991.
75209918
Type Your Pool and Spa Question Here...
Machinc is online now
A new question is answered every 9 seconds

My IC40 has a inspect cell light blinking even after the cell

Customer Question

My IC40 has a inspect cell light blinking even after the cell has been cleaned. Visual inspection shows cell is clean. Did a reset with no result. Did a hard reset(tripped disconnect) blinking stopped for a short while then started back.
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Machinc replied 1 year ago.
I will have your answer in a moment
Expert:  Machinc replied 1 year ago.
Hold the "more " button until a number appears
IE 20 40 up to 100%
This shows the life your cell has used.
Usually five years .
While you would expect the cell to last the full
100% some fail showing a lower number and have
to be replaced..'
You can try cleaning the cell again and cleaning
the filter .
If this does not work you will have to replace the cell. Customer
Expert:  Machinc replied 1 year ago.
Note:
Many refer to this as the dreaded
warning as it usually means cell
replacement.
If yours is less than five years old be
sure and check your paper work for a warranty.
Some companies give a five year warranty.
This may be an adjustable warranty but it
is worth checking into.
Customer

Related Pool and Spa Questions