How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22115
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

I have an omni logic control panel. Simple enough to set

Customer Question

I have an omni logic control panel. Simple enough to set up, however I cannot assign a hua for the ecostar 3400 pump. The communication is not set/ or working When I go thought the edit mode there is no assignable address to select from.
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.
Hello,
do you mean the control panel basically does not know the pump there as it is not "seeing" it?
Use reply

Related Pool and Spa Questions