How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Technician
Category: Pool and Spa
Satisfied Customers: 22102
Experience:  Licensed in Hydronics and Boilers
12672042
Type Your Pool and Spa Question Here...
Billy is online now
A new question is answered every 9 seconds

My Jandy Stealth pump bound up at some point yesterday - I

Customer Question

My Jandy Stealth pump bound up at some point yesterday - I went to add some chemicals in the early evening and when I turned it on at the timer, the motor just hummed. Took the pump apart and got a stick out of the impeller. When I put everything back together and tried to run it, nothing. Have been trying to source the problem and it seems that my timer may now be the problem. It keeps the time,,, but when I put a volt meter up against the terminals for the load wires, I get nothing. The pump and the heater are on the same terminals, then the blower is wired with the live wires coming in. The heater seems to get power when I throw the switch - it shows the same sequence on the LED as usual when I turn the pump on. It's an Intermatic PF1112T timer. Possible the relay burned out while the pump was bound up, or...?
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Billy replied 1 year ago.
so the motor runs when hotwired direct?
Use reply

Related Pool and Spa Questions