How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask poolguy810 Your Own Question
poolguy810
poolguy810, owner - pool and spa service company
Category: Pool and Spa
Satisfied Customers: 1671
Experience:  Servicing pools and all brands of spas for over 28 years.
32482502
Type Your Pool and Spa Question Here...
poolguy810 is online now
A new question is answered every 9 seconds

I have a dynasty Excalibur series. Replaced the pressure switch,

Customer Question

I have a dynasty Excalibur series. Replaced the pressure switch, replaced the entire heater, the three lights are still flashing. I took out the filters ran the pumps still flashing
Submitted: 1 year ago.
Category: Pool and Spa
Expert:  Machinc replied 1 year ago.
With everything you have replacedthat would leave the control boardas the problem. Check all the connections to it before you replace it. Look for corroded or loose conections.
Customer: replied 1 year ago.
Ok. Connections on the board itself or the board to the power supply?
Customer: replied 1 year ago.
And also- if I order the board myself is it something I can replace or
Does it require an expert?
Expert:  Machinc replied 1 year ago.
This is something other owners have done theirselves.Take q good look at the old one and see if youWould feel comfortable working on it.At this stage and because of rhe cost of the board some choose to have an expert comeOut to verify the diagnosis and have them replace the board

Related Pool and Spa Questions