Recent Feedback
My star-rite pool heater not turning on, I tried resetting power before and works but now not working...
Already Tried: Resetting power.. All LED on the control works but heater not heating water
Hi my name is Garry
Does the fan come on and run after you power on heater?
Is the SERVICE SYSTEM light on, or the SERVICE HEATER light on?
The heater canNOT fire unless the fan is running.
Do you have a multimeter to run some tests?
Sorry for the delay in responding back, I have been away for a bit.
If blower won't come on when trying to fire heater, disconnect blower and check for voltage between pins 1 and 3 at the Blower connector. If line voltage is present, replace blower.
If no line voltage is at pins 1 and 3 at the blower connector, The Ignition Control Module will need to be checked. Let me know what you find. Thank you.
If blower runs, but only runs intermittantly, you possibly have a short in the wiring going to the blower. Since I'm not there to test any of this, I have no way of knowing for certain.
When you are firing the heater you should have 24 volts going to the ignition control. If the 24V is there, then F1 and F2 will close to start the blower. If this operares this way, then you need to confirm the wiring to the blower is not opening sparadically causing it to sometimes run and sometimes not run.
Yes. check all contacts and wire terminations to be certain they are transferring full voltage!