Recent Feedback
I have a aqua rite salt water clorination system. the power and clorinating indicaters keep turning off for about a miniute then comes on about a miniute and continues this cycle.What could be causing this. Was working fine two days ago Roland Morvant
Already Tried: turning system off for 20 minites and restart
Hi My name is Garry
try doing a diagnostic
With the pump runing, go from "OFF" to "AUTO"
Press the diagnostic button two times
what voltage are you reading on the display?
Im getting a very erattic readings from 1.2-17.9
You should be reading a voltage between 24 to 31 volts.
Low voltage will require replacement of control board
Checking for response