How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Pontiac Mechanic
Category: Pontiac
Satisfied Customers: 20801
Experience:  GM, Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.
1609972
Type Your Pontiac Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

My keyless remote no longer works. I just bought a new

Customer Question

My keyless remote no longer works. I just bought a new battery for it and believe it needs reprogrammed to the car
JA: Have you checked the fob's battery?
Customer: just replaced it with a brand new one
JA: What is the model/year of your Pontiac?
Customer: 2006 Pontiac g6 gt
JA: Are you fixing your G6 GT yourself? What have you tried so far?
Customer: I would like to do it myself if possible. and so far I have not tried any steps to reprogram the keyless remote
JA: Anything else you want the mechanic to know before I connect you?
Customer: Just how I reprogram it to work :)
Submitted: 4 months ago.
Category: Pontiac
Expert:  Don 'Mo Lurch' replied 4 months ago.

sorry for the delay........
There is NO back door Programming or Customer Programming
GM Dealer Scan Tool is needed
apprx 1 hour labor

Up to 4 transmitters can be programmed.
Do not operate or program the transmitters in the vicinity of other vehicles that are in the keyless entry program mode. This prevents the programming of the transmitters to the incorrect vehicle. The order in which the transmitters are programmed is important. The first transmitter programmed will be transmitter #1, and the second transmitter programmed will be transmitter #2. Use care to program the transmitters correctly.

The scan tool must stay connected until all of the transmitters are programmed. All doors must be closed to perform this function.

Install CANDI module.
Install a scan tool.
Turn ON the ignition with the engine OFF.
With the scan tool, select Vehicle Control Systems.
Select Computer/Integrating Systems
Select the proper engine size.
Select Module Setup.
Select Body Control Module (BCM).
Select Program Key Fobs.
Follow scan tool on screen instructions.
Remove the scan tool.
Exit the vehicle. Attempt to lock/unlock the doors to verify the programming.
Operate the transmitter functions in order to verify correct system operation.

Expert:  Don 'Mo Lurch' replied 4 months ago.

.

.

.

hello?