How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Pontiac Mechanic
Category: Pontiac
Satisfied Customers: 20516
Experience:  GM, Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.
1609972
Type Your Pontiac Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

I need a reverse audio harness, I need the color codes to

Customer Question

I need a reverse audio harness for Pontiac, I need the color codes to connect the harness correctly, the other one was cut, where can I find this information.
Submitted: 8 months ago.
Category: Pontiac
Expert:  Gary replied 8 months ago.

I am sorry for the long wait

which harness ?

the one for the rear radio controls ? where is it located ?

Customer: replied 8 months ago.
The factory audio harness located rear to radio , it was cut off I need the color codes to connect the new harness example, red is 12v
Expert:  Don 'Mo Lurch' replied 8 months ago.

are you installing the Factory Radio or Aftermarket?
Are you wanting to install Factory Plug to Factory Harness?
Do you have the Factory Plug?

Expert:  Don 'Mo Lurch' replied 8 months ago.

are you installing the Factory Radio or Aftermarket?
Are you wanting to install Factory Plug to Factory Harness?
Do you have the Factory Plug?

Customer: replied 8 months ago.
Aftermarket, I have a reverse wiring harness for GM since the old was cut off, resplicing it back so I can plug into new radio
Customer: replied 8 months ago.
My problem is I need the original schematics for the original factory harness audio color codes
Expert:  Don 'Mo Lurch' replied 8 months ago.

.

sorry for the delay............
.
Greetings...... “Hi, I’m Don (aka MOLurch) and I look forward to helping you!”
.
Thank you for the added info..........
Please Click Attachment below
The Factory Color wires may NOT be all used, as it depends on what you are installing
You may also need a GM Adapter for DATA Turn On & you will need a Antenna Adapter for GM to Aftermarket Radio
IF you decide you want to install a GM Plug back on the cut wires use:

http://www.installer.com/cars/by_car.php?carid=4799

71-2103-1
GM Car Radio Harness plugs into the factory radio
General Motors Into OEM Radio Power and 4-Speaker Fully pinned 24-pin plug and 12-pin plug

.
IF you need more information, please ask "prior" to Rating.
.
Please do the right thing and leave a rating, using the rating system, so I may be credited for this Q&A.
.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
.
If for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT today.
Please reply and let me know why, so I can help more/better.
.
Rating is very Important to our Service
.
.

Expert:  Don 'Mo Lurch' replied 8 months ago.

Here is a little more info:
Because your Factory Radio is triggered ON, by the BCM, you will need to :
a) use adapter
b) locate a Ignition / Accessory (+) if "hard wiring"
.

http://www.metraonline.com/vfgapi/vehicle/77528

.

Depending on Factory Radio & if you install the Factory Radio Plugs back on the Factory Cut wires

GMRC-05
THE GMRC-05 IS DESIGNED FOR USE IN SELECT 2005-2006 CHEVROLET EQUINOX AND PONTIAC TORRENT WITHOUT ONSTAR.
THE GMRC-05 PROVIDES +12 VOLT ACCESSORY AND RETAINS WARNING CHIMES THROUGH AND ON-BOARD SPEAKER
.
GMOS-07
•Provides accessory (12 volt 10 amp)
•Retains R.A.P.
•Retains chimes
•Provides NAV outputs (including mute)
•Retains OnStar
•Adjustable volume for chimes and OnStar
•Retains balance and fade
•USB updatable
•High level speaker input
.

Expert:  Don 'Mo Lurch' replied 8 months ago.

.
Please do the right thing and leave a rating, using the rating system, so I may be credited for this Q&A.
.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
.
If for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT today.
Please reply and let me know why, so I can help more/better.
.
Rating is very Important to our Service
.
.

Expert:  Don 'Mo Lurch' replied 8 months ago.

When you sign up on Just Answer to get an answer for your question, you provide an authorization payment.

Once any tech responds, you are then charged the full question value.

You need to use those funds by rating okay-good-excellent.

Not rating, rating bad or poor does not result in a refund.

I am here to help, so please reply if you need more help.

If your good to go, please take a moment to rate my response, as it was correct.
......................................

Related Pontiac Questions