How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Pontiac Technician
Category: Pontiac
Satisfied Customers: 2373
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Pontiac Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

I'm ***** ***** and I am trying to remove the blower motor

Customer Question

Hi I'm ***** ***** and I am trying to remove the blower motor control module from my 1999 Grand Prix
JA: Thanks. Can you give me any more details about your issue?
Customer: The fan stopped working completely. I have the auto temp control
JA: OK got it. Last thing — Pontiac Mechanics generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 12 months ago.
Category: Pontiac
Expert:  Reggie Whiddon replied 12 months ago.

Hi are you needing the location of this component or help diagnosing this issue

Customer: replied 12 months ago.
Hi,
I found the location of the item, but i need help understanding how to remove it? I can only see one of the screws holding it in and am having a horrible time reaching the other 2 screws.
Expert:  Reggie Whiddon replied 12 months ago.

Okay let me look this up

Expert:  Reggie Whiddon replied 12 months ago.

Okay most of the time there are only two screws there on opposite ends of each other. Usually 5.5 mm Access is limited Do you have your new one yet? Go ahead and get it take a look at it that way you will know where thr screws go because like I said it's tigjt

Customer: replied 12 months ago.
Right I see that it is tight to get in there and thats the problem i am having
Expert:  Reggie Whiddon replied 12 months ago.

For me having the new part in hand helps because I can look at it and get an idea of where screw holes are because you hAve to feel for them

Customer: replied 12 months ago.
Sorry but this isnt helping. Cant get the socket in there to loosen the screws and cannot tell if they are seated on the screws when turning the socket wrench
Expert:  Reggie Whiddon replied 12 months ago.

Are you using a deep well 5.5 mm socket