How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Pontiac Technician
Category: Pontiac
Satisfied Customers: 2373
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your Pontiac Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

What I did was put one end of the meter to pin 24 on the ABS

Customer Question

Hey what I did was put one end of the meter to pin 24 on the ABS module and the other end in pin 9 of the ODB2 and nothing. Is that correct not through the connector of the ABS module/
Submitted: 1 year ago.
Category: Pontiac
Expert:  camerontech replied 1 year ago.

one end of the meter should be at pin 24 of the "connector" not the module and the other at the obd 2 connector

Expert:  camerontech replied 1 year ago.

because when the abs is disconnected, there is no possible way that the module would have continutity .

You are checking the connection of the tan wire at the connector to the obd 2

Customer: replied 1 year ago.

Ur right sorry? Thanks

Expert:  camerontech replied 1 year ago.

let me know

cam

Customer: replied 1 year ago.

Thanks

Customer: replied 1 year ago.

ok thanks very much