How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Z. Your Own Question
Ron Z.
Ron Z., - Pontiac Tech -
Category: Pontiac
Satisfied Customers: 18356
Experience:  18+yrs experience. State Inspector and Pontiac Diagnostics
18617752
Type Your Pontiac Question Here...
Ron Z. is online now
A new question is answered every 9 seconds

how do u remove a lock cylinder on 2002 pontiac grand prix gt

Resolved Question:

how do u remove a lock cylinder on 2002 pontiac grand prix gt
Submitted: 7 years ago.
Category: Pontiac
Expert:  Ron Z. replied 7 years ago.

REMOVAL:

  • Disconnect the negative battery cable from the battery.
  • Remove the upper and lower steering column trim covers.graphic
  • Disconnect the ignition lock cylinder electrical connector from the wiring harness on the column.
  • Put the key in the steering column lock cylinder set.
  • Turn the key to the START position.
  • Install a 1/16 alien wrench into the hole on top of the lock module assembly to release the steering column lock cylinder set retaining pin.
  • Turn the steering column lock cylinder set into the RUN position.
  • Pull the steering column lock cylinder set out from the lock module assembly.
  • Remove the key from the steering column lock cylinder set.
Ron Z. and 8 other Pontiac Specialists are ready to help you
Customer: replied 7 years ago.
the ignition lock cylinder is locked i cant get the key to turn at all and cant get it to the start position

Related Pontiac Questions