How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, Pontiac Technician
Category: Pontiac
Satisfied Customers: 15926
Experience:  15 years GM master tech/15 years ASE master
19513769
Type Your Pontiac Question Here...
Gary is online now
A new question is answered every 9 seconds

Trying to replace the belt tensioner on my 98 Sunfire. Body

This answer was rated:

Trying to replace the belt tensioner on my 98 Sunfire. Body metal prevents removing the mounting screw. How do I get the screw and tensioner off?
ok use a floor jack under the oil pan..remove that mount then lower the jack or raise the jack just enough that the bolt will clear the frame
Gary and 4 other Pontiac Specialists are ready to help you