How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Marc Your Own Question
Marc
Marc, Plumber
Category: Plumbing
Satisfied Customers: 1126
Experience:  Plumbing heating & home maintenance contractor
50715266
Type Your Plumbing Question Here...
Marc is online now
A new question is answered every 9 seconds

We roughed-in a 90 degree transfer valve above a moentrol

Customer Question

hey we roughed-in a 90 degree transfer valve above a moentrol with the same 5 1/2 inch hole in shower at about 10" verticle c/c
now the transfer trim too small to cover hole ? ordered larger 90 degree moentrol trim but the diagonal holes c/c about 1/2 difference on the two
going to fab an adatper piece and need the thread specs on the chromb screws?
Submitted: 9 months ago.
Category: Plumbing
Expert:  WCohn replied 9 months ago.

Hello, my name is ***** ***** i look forward to helping you

Expert:  WCohn replied 9 months ago.

So you just want the thread specs that hold on the trim?

Expert:  WCohn replied 9 months ago.

The screws are 8-32

Expert:  WCohn replied 9 months ago.

Are we done here?