How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask WCohn Your Own Question
WCohn
WCohn, Journeyman Plumber
Category: Plumbing
Satisfied Customers: 819
Experience:  Journeyman Plumber/Estimator
6211579
Type Your Plumbing Question Here...
WCohn is online now
A new question is answered every 9 seconds

I HAVE A TMC-212 CONTROLLER AND A 10 STATION WATERING

Customer Question

I HAVE A TMC-212 CONTROLLER AND A 10 STATION WATERING SYSTEM. WHEN I ST THE CONTROLLER TO STATION 2 ALL OF THE STATIONS COME ON, AND WHEN IT IS CYLING THROUGH MULTIPLE STATIONS MORE THAN 1 OR TWO STATIONS WILL COME ON AT THE SAME TIME. WHAT NEEDS FIXING?
Submitted: 10 months ago.
Category: Plumbing
Expert:  WCohn replied 10 months ago.

Hello, my name is ***** ***** I look forward to helping you!

Is this a new install or and old install with a new problem?

Customer: replied 10 months ago.
OLD INSTALL ABOUT 3 YEARS OLD
Expert:  WCohn replied 10 months ago.

The manual states that you either have overlapping times or no end time programmed. If neither of these two or the issue I'd have to guess it PCB problem that would require replacement of the controller

Expert:  WCohn replied 10 months ago.

Do you have the manual? Would you like a link to it?

Customer: replied 10 months ago.
I HAVE THE MANUAL AND WOULD CONCUR WITH YOUR RESPONSE AND HAVE ALREADY ORDERED SUFFICIENT MODULES TO REPALACE THE 6 IN THE CONTROLER BOX.
Expert:  WCohn replied 10 months ago.

Good. You are on the ball. If you are satisfied with my help I'd appreciate a positive rating. Best of luck sir.

Expert:  WCohn replied 10 months ago.

Do you need further assistance or are you satisfied with my answer?