How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brian Horton Your Own Question
Brian Horton
Brian Horton,
Category: Plumbing
Satisfied Customers: 3
Experience:  Service Technician II at Hobart Corporation
64202524
Type Your Plumbing Question Here...
Brian Horton is online now
A new question is answered every 9 seconds

I HAVE A PROBLEM WITH A COMMERCIAL W/H MODEL #GNU75-125 I

Customer Question

I HAVE A PROBLEM WITH A COMMERCIAL W/H MODEL #GNU75-125 I HAVE CHANGED OUT THE CONTROL -PILOT ASSEMBLY -BLOWER ASS,THIS IS WHAT THE CONTROL MODULE LIGHT SYSTEM SUGGESTED ALSO PILOT TUBE WAS SEVERED AT THIS POIMT I THOUGHI I GOT IT BUT THE THERMOSTAT AND PILOT LIGHT WENT OUT AND I GOT BLOWER BUT NO FIRE ? IS IT THE ELECTRONIC MODULE LEADING ME ASTRAY
Submitted: 1 year ago.
Category: Plumbing
Expert:  Brian Horton replied 1 year ago.

This could be you ignition module. Do you have 24 volts going to the ignitor?

Expert:  Brian Horton replied 1 year ago.

Is there a flame sense rod on this unit?

Expert:  Brian Horton replied 1 year ago.

Any luck?