How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brian Your Own Question
Brian
Brian, Plumber
Category: Plumbing
Satisfied Customers: 837
Experience:  16 yrs. experience as plumber, including full bathroom and kitchen installations.
63187465
Type Your Plumbing Question Here...
Brian is online now
A new question is answered every 9 seconds

My softener has water in it and when I regenerate it is set

Customer Question

my softener has water in it and when I regenerate it is set to br and the manual says it should be at f. It is a kenmore ultrasoft 100

Submitted: 2 years ago.
Category: Plumbing
Expert:  Brian replied 2 years ago.
Firstly can you turn the machine off for 5 minutes and then switch it back on, then please check page 23 of this Manual.
http://www.manualslib.com/manual/85842/Kenmore-100-150.html?page=23#manual