How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Pete Your Own Question

Pete
Pete, Engineer
Category: Phone Systems
Satisfied Customers: 16341
Experience:  Over 16 years experience installing and repairing electronics.
30970729
Type Your Phone Systems Question Here...
Pete is online now
A new question is answered every 9 seconds

Have Lucent Partner 18D phone system. Power went out. Now

Customer Question

Have Lucent Partner 18D phone system. Power went out. Now trying to reprogram. Extensions are identified. Day, Date, Time - Done. Can't figure out how to reprogram buttons so we have instant intercom from one extension to another. It works if I hit intercom then * then the extension number but we had buttons programmed as well. Hope I'm being clear. I have the programming book.
Submitted: 10 months ago.
Category: Phone Systems
Expert:  Pete replied 10 months ago.

Hi Kathy,

To program a button for instant intercom:

  1. Press Feature 00.
  2. Press a programmable button.
  3. Press System Program (or Left Intercom) and dial the two-digit extension number to be on that button.
  4. Press Feature 00 to exit programming.
Expert:  Pete replied 10 months ago.

Hi Kathy, just checking in on your question. How did things turn out for you?