I have a modelKX-TG6311S with total of 4 cordless phones. The visual message center is now stating" line in use." This has just happened. How do I disable theis statment since no units are operating.
Gone thru entire operating manual and find nothing to help.
Hi, Welcome to Just Answer
How long have you owned the system? Have you checked your phone line to ensure that it is connected? Can you try to call your phone number from your cell phone or have someone call your number? What do you hear?
You can try to reset your phone. Disconnect all the power adapters, remove batteries from all the handsets and let the system sit for 3-5 minutes and then put it back together. Reset the phone system would erase all the phone memory including saved phone numbers and voice messages, be careful!
Let me know the results
Our chat has ended, but you can still continue to ask me questions here until you are satisfied with your answer. Come back to this page to view our conversation and any other new information. What happens now? If you haven’t already done so, please rate your answer above. Or, you can reply to me using the box below.
I cannot read you response. Would you please let me know the results
The unit was purchased 07-2008. Line is working. Since reboot is your only sugesstion, i must assume this is not a recommended manufacturers suggestion. I do not wish to follow your recommendations
I will opt out and let other experts try this.