How do I replace the bulb on a Peugeot 307 HDI where the clock is situated in the dash.Thank You
Hi..Sorry for delay
Hopefully i can help..
If your refering to multifunction display which has your clock etc then that can be removed "whole unit" by carefully pulling in an upwards direction that should release the clips - there will be plug connector on the rear which you can remove - you will se a couple of screws that need removing to and you should able to replace/acess the bulbs..
Attachments are only available to registered users.
Release the multifunction central display by turning up (Fig.A)
Disconnect the connector release wiring harnessRemove the multifunction display unitFor install proceed in reverse order of extraction operationsMake a functional test..