How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask ElectronicsPete Your Own Question

ElectronicsPete
ElectronicsPete, Engineer
Category: Office Equipment
Satisfied Customers: 15734
Experience:  Electronic Engineer
30970729
Type Your Office Equipment Question Here...
ElectronicsPete is online now
A new question is answered every 9 seconds

Our Canon DR-M140 scanner had a paper jam and now out images

Customer Question

Our Canon DR-M140 scanner had a paper jam and now out images show up on the computer screen at an angle (rotated like a 30-45 degree angle..not flat image on the screen). How do we correct?
Submitted: 1 year ago.
Category: Office Equipment
Expert:  ElectronicsPete replied 1 year ago.
Hello,
I am Pete, and I'll be happy to assist with your question today.
Either a small piece of paper is still be stuck in the scanner, or the paper feed mechanism has been damaged. This would cause the scanned pages to get fed in to the scanner at an angle.
Open the scanner and check for any fragments of paper. Use tweezers or compressed air to remove them.

Related Office Equipment Questions