How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chad Farhat Your Own Question
Chad Farhat
Chad Farhat, ASE Certified Technician A6 - Electrical / Electronic systems A7 Heating / Air conditioning systems
Category: Nissan
Satisfied Customers: 1538
Experience:  Owner at Carolina Auto Service & Sales , 20 years Experience in Foreign & Domestic vehicles
45790705
Type Your Nissan Question Here...
Chad Farhat is online now
A new question is answered every 9 seconds

Sputtering while driving, Car dies when placed in

Customer Question

Sputtering while driving, Car dies when placed in gear....will take off after a little bit. No codes
JA: Just to clarify, what's the exact code? And have you tried to reset it?
Customer: There are no codes pulling
JA: What is the model/year of your Nissan?
Customer: 2008 Altima
JA: Are you fixing your Altima yourself? What have you tried so far?
Customer: Have replaced Crankshaft position sensor, Fuel Pump and Maps Sensor
JA: Anything else you want the mechanic to know before I connect you?
Customer: Not offhand
Submitted: 2 months ago.
Category: Nissan
Expert:  Chad Farhat replied 2 months ago.

Hi, I'm Chad. Welcome to JustAnswer. I'm reviewing your question and I will be posting your reply ASAP.

Expert:  Chad Farhat replied 2 months ago.

Have you checked for vacuum leaks

MAF sensor , Mass air flow sensor.MAF are bad not throwing a code

what are the fuel trims reading long term & short term at idle ,can you get me that ?

Check The plastic air tube between mass and TB assembly ,checked for cracks

Please let me know

Thank You

Chad Farhat

ASE Certified Technician