How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Mohr Your Own Question
Tim Mohr
Tim Mohr, ASE MASTER TECH
Category: Nissan
Satisfied Customers: 560
Experience:  30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL
17454363
Type Your Nissan Question Here...
Tim Mohr is online now
A new question is answered every 9 seconds

Abs vdc slip lights are on. no brake light. Alignment was

Customer Question

Abs vdc slip lights are on.
JA: Is it just the ABS light? Or is the brake system warning light on, too?
Customer: no brake light. Alignment was done after replacing bothe front wheel bearing hubs. No lights until a month later.
JA: What is the model/year of your Nissan?
Customer: 2005 Xterra Sr.
JA: Are you fixing your Xterra yourself? What have you tried so far?
Customer: se
JA: Anything else you want the mechanic to know before I connect you?
Customer: scan of abs shows both wheel speed sensors and steering sensor open or short.
Submitted: 3 months ago.
Category: Nissan
Expert:  david craig replied 3 months ago.

Hi Im David, thanks for visiting the site. When they replaced the wheel bearing/hub assemblies they probably didnt secure the abs wheel speed sensor harnesses correctly and routed them improperly to where they got pinched or are chaffed through shorting out against the knuckle. if you can, pull the front tires and inspect the wheel speed sensor harnesses for damage. if so, then the repair shop will be responsible for the repair.

Expert:  david craig replied 3 months ago.

just checking in to see how its going

Related Nissan Questions