How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris(aka-Moose) Your Own Question
Chris(aka-Moose)
Chris(aka-Moose), Nissan Technician
Category: Nissan
Satisfied Customers: 598
Experience:  16 years of experience
2499435
Type Your Nissan Question Here...
Chris(aka-Moose) is online now
A new question is answered every 9 seconds

2005 Nissan Altima - changed driver side low beam bulb and

Customer Question

2005 Nissan Altima - changed driver side low beam bulb and would not light (Sylvania H1). While trying to figure out problem, noticed turn signals not working on either side. Don't think this was an issue before the bulb change, but it's my wife's car, so who knows? Ground wire is good, but don't seem to be getting anything thru positive connector. I guess my question is - does the driver side low beam have its own fuse? And would any of this have to do with turn signals too?
Note: I bought this car used and don't have the manual
Submitted: 8 months ago.
Category: Nissan
Expert:  Dan replied 8 months ago.

Hello my name is***** am an ASE Master Technician and I am glad to help you out with your question.

Expert:  Dan replied 8 months ago.

Do you need a wiring diagram of the low beam circuit?