How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris(aka-Moose) Your Own Question
Chris(aka-Moose)
Chris(aka-Moose), Nissan Technician
Category: Nissan
Satisfied Customers: 592
Experience:  16 years of experience
2499435
Type Your Nissan Question Here...
Chris(aka-Moose) is online now
A new question is answered every 9 seconds

Just replaced my battery! All electrical works except the

Customer Question

Just replaced my battery! All electrical works except the engine will not turn over. Re-checked the battery connections & even checked the fuse under the dash. Plus, I misplaced my vintage Haynes manual!
JA: Have you located the fuse box? Have you checked the circuit?
Customer: The fuse box under the dash? Yes pulled the 15A "engine" fuse & it looks fine.
JA: What is the model/year of your Nissan?
Customer: 1995, XE King Cab, 4-cylinder engine.
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Replaced the battery; re-checked the terminal connectors; checked the fuse in the fuse box under the dash.
JA: Anything else you think the mechanic should know?
Customer: It may be time to put this vehicle out to pasture!
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Nissan Mechanic about your situation and then connect you two.
Submitted: 9 months ago.
Category: Nissan
Expert:  Roy Belding replied 9 months ago.

good afternoon my name is ***** ***** I will assist

the intakes are different. the center ports for the exhaust bolts are at a different angle. there are aftermarket intakes that will fit such as edelbrock.

Roy

Expert:  Roy Belding replied 9 months ago.

sorry, locked on to wrong question

Roy