How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Roy Belding Your Own Question
Roy Belding
Roy Belding, ASE Certified Technician
Category: Nissan
Satisfied Customers: 4634
Experience:  41 years expierence on all cars and trucks to 2014
3506196
Type Your Nissan Question Here...
Roy Belding is online now
A new question is answered every 9 seconds

I need to reset the abs light on a 2006 Murano but my scan

Customer Question

i need to reset the abs light on a 2006 Murano but my scan tool does not do Nissan abs for some reason. I already changed the wheel sensor. any other way to reset it
Submitted: 6 months ago.
Category: Nissan
Expert:  Roy Belding replied 6 months ago.

good evening my name is ***** ***** I will assist

the abs system will re set itself everytime you re start the car. if you did the correct repair, the light will go off and stay off.

what was the code you had???

you can try to remove the battery cable and re attach but you will also loose all your memories as well for other systems.

Roy

Customer: replied 6 months ago.
left front wheel sensor and I replaced it today. the awd light is also on
Expert:  Roy Belding replied 6 months ago.

awd will go out when the abs is resolved.

what was the code number???

Customer: replied 6 months ago.
not sure. someone else took it to be read
Expert:  Roy Belding replied 6 months ago.

then I wonder if you replaced the correct part. a code never identifys bad parts just failed systems.

try removing the cable???

Customer: replied 6 months ago.
which cable?
Expert:  Roy Belding replied 6 months ago.

battery cable

did you read my repsonse

Customer: replied 6 months ago.
left it off for half hour and lights came right back on
Expert:  Roy Belding replied 6 months ago.

ok, then the issue or failure has not been repaired. need to start from scratch with the code number. clearing does nothing as the failure is still active

Roy

Customer: replied 6 months ago.
ok I will get that tomorrow and get back to you thanks
Expert:  Roy Belding replied 6 months ago.

ok

Expert:  Roy Belding replied 6 months ago.

please dont forget to rate me as it is the only way I get paid for my efforts

Roy