How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris(aka-Moose) Your Own Question
Chris(aka-Moose), Nissan Technician
Category: Nissan
Satisfied Customers: 598
Experience:  16 years of experience
Type Your Nissan Question Here...
Chris(aka-Moose) is online now
A new question is answered every 9 seconds

2008 Nissan Maxima 3.5 SE idle fines, accelerates fines in

Customer Question

2008 Nissan Maxima 3.5 SE idle fines, accelerates fines in parking but when you put it in gear and drives it start to choke on acceleration?
Submitted: 11 months ago.
Category: Nissan
Customer: replied 11 months ago.
code p0447 keeps coming up after resetting computer
Expert:  Jay replied 11 months ago.

Hello my name is ***** ***** thank you for your question.

That code is for a Evap Vent control valve and will not cause your issue.

Do you have a full blown scanner?

Customer: replied 11 months ago.
no only a code scanner
Expert:  Jay replied 11 months ago.

Where did you get the MAF sensor you installed?

Customer: replied 11 months ago.
I got it from another 2005 Nissan maxima so I just used it to see if that was the problem. If I would of purchased it I could not returned it that's why I thought of borrowing my friend's before buying one.
Expert:  Jay replied 11 months ago.

Did it do the same thing before you changed the transmission?

Customer: replied 11 months ago.
do you think it could of been that MAF that I used from an 05 on would that be different from the 08?
Expert:  Jay replied 11 months ago.

I think they are the same MAF sensor. Has fuel pressure been checked and exhaust checked for any restrictions?

Customer: replied 11 months ago.
No, I haven't checked fuel pressure. How can I check the fuel pressure and the exhaust?
Expert:  Jay replied 10 months ago.

Fuel pressure is checked with a gauge, and the exhaust is checked by lowering the flex pipe to ensure the catt converters are not broken up causing a exhaust flow restriction.

Customer: replied 10 months ago.
I did what you said but got this code p0081. Does the computer control this piece? We also changed the intake valve control solenoid bank 2, even disconnected and it still did the same thing. Do you think my computer could be bad?
Expert:  Jay replied 10 months ago.

I know a trick to determine if the computer is bad. You said you changed this solenoid? Do you know which side is Bank 2?

Customer: replied 10 months ago.
the one closer to the radiator