How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JOHN aka Eauto Your Own Question
JOHN aka Eauto
JOHN aka Eauto, The Car Guy
Category: Nissan
Satisfied Customers: 15895
Experience:  ase tech over 15 years in the field uaw union member
6149662
Type Your Nissan Question Here...
JOHN aka Eauto is online now
A new question is answered every 9 seconds

My VDC light came on recently about 100 mi after I had my tires

Customer Question

my VDC light came on recently about 100 mi after I had my tires rotated and alignment done. The tire and aligment shop said it is not from them.
JA: The mechanics have tons of experience in that area. Are those all of the "symptoms"?
Customer: yes just the VDC light only. It turns off when restarting the car then turns on after 3mi of driving
JA: Anything else I can tell the Nissan Mechanic before I connect you two?
Customer: no
JA: Got it. Let's get this figured out. I'm sending you to a secure page on JustAnswer so you can place the $5 fully refundable deposit now. While you're filling out that form, I'll tell the Nissan Mechanic about your situation and connect you two. You'll be on the road in no time.
Submitted: 1 year ago.
Category: Nissan
Expert:  JOHN aka Eauto replied 1 year ago.
have you scanned it for trouble codes?
Customer: replied 1 year ago.
My bully dog doesn't show codes. I tried the trouble code scan
Expert:  JOHN aka Eauto replied 1 year ago.
do you have access to a better scan tool that has abs and body control capabilities?
Customer: replied 1 year ago.
Is there an affordable scanner tool that reads 2012 nissan frontier sv
Customer: replied 1 year ago.
I can buy one
Expert:  JOHN aka Eauto replied 1 year ago.
that's going to be the first step in troubleshooting...the shop that did the alignment didn't offer?
Customer: replied 1 year ago.
Yes. They cleared the code but didn't say what it was.
Customer: replied 1 year ago.
If I get a tool and scan. Can I resume this chat with you
Expert:  JOHN aka Eauto replied 1 year ago.
I would ask them for the code have them scan it and show you...and then I can figure out what it is and if it can possibly be related to he work performed..
Customer: replied 1 year ago.
Ok thanks
Expert:  JOHN aka Eauto replied 1 year ago.
let me know when u get the code hope u can rate me 5 star

Related Nissan Questions