How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Mohr Your Own Question
Tim Mohr
Tim Mohr, ASE MASTER TECH
Category: Nissan
Satisfied Customers: 560
Experience:  30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL
17454363
Type Your Nissan Question Here...
Tim Mohr is online now
A new question is answered every 9 seconds

I had to replace my water pump so you know where this is

Customer Question

I had to replace my water pump so you know where this is going I marked where the 2 cams were put them back when I desiderate to replace the belt and now all hell broke loose and it won't start need help don't know what to do
JA: Are you hoping to fix this yourself?
Customer: Yes I hope
JA: Great! What have you tried so far?
Customer: I have put the motor at what I think is top dead center and set both cams to the dimple marks and now will not start
JA: Is there anything else important you think the Nissan Mechanic should know about your Nissan?
Customer: No
JA: I'm sending you to a secure page on JustAnswer so you can place the $5 fully refundable deposit now. While you're filling out that form, I'll tell the Nissan Mechanic about your situation and connect you two.
Submitted: 8 months ago.
Category: Nissan
Expert:  AZTechBrian replied 8 months ago.

Hello. Did your new timing belt come pre marked?

Related Nissan Questions